Boiler Information Menu - Dunkirk DCC-150 COMBI Manuel D'installation, D'utilisation Et D'entretien

2.10 BOILER INFORMATION MENU

Press and hold down for at least 1 second, to display the information indicated in the table. Press
DESCRIPTION
00
Secondary fault internal code
01
Heating flow temperature (°F/°C)
02
Outdoor temperature (°F/°C)
03
Indirect Tank DHW temperature (boiler CH only)
Domestic hot water temperature
04
(boiler with plate exchanger)
05
Water pressure in heating system (PSI/bar)
06
Heating return temperature (°F/°C)
07
Thermo fuse status (000/001)
08
Not used
BUTTONS Key
DHW temperature adjustment
(+ to increase the temperature and – to decrease it)
Heating water temperature adjustment
(+ to increase the temperature and – to decrease it)
Boiler operating information
Operating mode:
DHW – DHW & Heating – Heating Only
Off – Reset – Exit menu/functions
SYMBOLS Key
Off: heating and DHW disabled
(only boiler frost protection is active)
Ignition fault
Boiler/system water pressure low
Call a qualified service technician
Manually resettable fault (
Fault in progress
09
10/11
12
13
14
15
16
17
18
)
12
DESCRIPTION
Setpoint Central Heating (°F/°C)
Manufacturing information
Flue sensor temperature (°F/°C)
Manufacturing information
Identification Open Therm communication
Manufacturing information
Manufacturing information
Fan speed ("i17"x100)
Manufacturing information
Burner lit
DHW operating mode enabled
Heating mode enabled
Programming menu
Boiler information menu
Set unit of measurement (SI/US)
240011373, Rev. G [03/31/2017]
to exit.