Télécharger Imprimer la page

STEINEL IS D360-120 Consignes D'installation page 8

Publicité

Les langues disponibles

Les langues disponibles

14
Troubleshooting
Problem
Cause
No power at the
breaker has tripped or
sensor
is not switched ON
break in wiring
or short circuit
Lights do not
light level setting is in
switch ON
nighttime mode during
daytime operation
lamp burned out
power is off
breaker has tripped
detection zone not
correctly adjusted
www.steinel.net
(800) 852-4343
All manuals and user guides at all-guides.com
Remedy
reset breaker, check
wiring with voltage
tester
check for proper
wiring connections
adjust light level
setting
replace lamp
turn power on at
circuit breaker
reset breaker
readjust
Troubleshooting
Problem
Cause
Lights do not
abundant heat from the
switch OFF
fi xture's lamps is within
the detection zone and
keeps lights on as a
result of temperature
change
continuous movement
in the detection zone
switched on light is
Lights keep
within detection zone
switching ON/OFF
sensor is detecting
Lights switch ON
movement outside of
without obvious
the lighting zone
movement
Remedy
mount sensor below
the lamps
readjust zone or
apply shroud
adjust detection
zone or apply
shrouds
adjust zone or apply
shrouds
www.steinel.net
(800) 852-4343
15

Publicité

loading