Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
handles of the appliance. Use a damp
cloth or a brush.
•
Only dry wipe the saw chain. After
cleaning, lightly oil the saw chain with
chain oil. Apply individual drops of oil
to the joints and the points of the teeth
on the individual chain links.
Table of maintenance intervals
Machine Part
Komplette Maschine
Accessible screws
and nuts
Chain wheel
Saw chain
Blade
Sharpening the cutting teeth
Leave the resharpening of a saw chain to a
specialist or proceed according to the instruc-
tions for your saw chain sharpener. Reshar-
pening a saw chain takes practice. If in doubt,
it is preferable to replace the saw chain.
72
Action
Check condition, replace damaged
parts if necessary
Tighten
Check, replace if necessary
Check, oil, sharpen or replace if
necessary
Check, turn, clean, oil
Maintenance intervals
Carry out the maintenance work listed
in the table below at regular intervals.
Regular maintenance of your equipment
extends the lifespan of the equipment.
You will also achieve optimum cutting per-
formances and avoid accidents.
Before
each use
Changing the saw chain
Never fix a new saw chain on a
worn set of teeth or on a damaged
or worn blade.
1. Turn off the appliance and, before do-
ing any servicing, remove the battery.
2. Undo the blade fixing screw (
and take off the chain wheel cover
(
6).
3. Take off the old saw chain (
The assembly and tensioning of the new
saw chain are described in the "Assembly
instructions" chapter.
After 10 ope-
rating hours
5)
1).
Publicité
Table des Matières
