Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
Technical Data
Cordless telescopic pruner
Motor voltage ................................20 V
Protection class ..................................... III
Protection category............................IPX0
Chain speed v
........................max. 5 m/s
0
Weight
(without battery and charger) .......3.4 kg
Volume oiltank ................................100 ml
Chain bar ........... 8" Oregon 080SDEA041
Chain .............................Oregon 91P033X
Chain pitch...........................3/8" (9,5 mm)
Number of chain drive links .................. 33
Chain width ................................... 1.3 mm
Teeth of the sprocket chain wheel .......... 6
Sawing length .........................ca. 180 mm
Acoustic pressure level
(L
) ................77.8 dB(A); KpA= 3.0 dB
pA
Sound power level (L
measured .... 87.8 dB(A); KwA= 2.72 dB
guaranteed .............................. 91 dB(A)
Vibration (a
)
h
Rear handle.............................2.55 m/s
Front handle ............................2.48 m/s
Technical and visual changes may be
made without notice during the course of
development. All dimensions, directions
and information in these instructions for
use are therefore subject to change. No
legal positions based on the instructions
for use can therefore be enforced.
The specified vibration emission value
has been measured in accordance with a
standardised testing procedure and can
be used to compare one power tool with
another. The specified vibration emission
value can all be used for an initial esti-
mate of the exposure.
62
)
WA
K=1.5 m/s
Warning:
During actual use of the power
tool, the vibration emission value
may differ from the value specified,
depending on the manner of use of
the power tool.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
Safety information
This section deals with the basic safety
regulations to be observed when working
with the machine.
2
An cordless pruner is a dangerous
2
device, which can cause serious or
2
even fatal injuries with incorrect or
careless use. Thus, for your own safe-
ty and the safety of others, you should
always take note of the instructions
on safety and, in case of difficulties,
consult a specialist for advice.
Icons and symbols
Symbols used on the device
1
2
8
3
4
5
9
10
11
12
6
7
Publicité
Table des Matières
