Ryobi DS1200 Manuel D'utilisation page 3

GENERAL POWER TOOL SAFETY WARNINGS
POWER TOOL USE AND CARE
 Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
 Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
 Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
 Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool's operation.
All manuals and user guides at all-guides.com
 Keep cutting tools sharp and clean. Properly main-
 Use the power tool, accessories and tool bits etc.
SERVICE
 Have your power tool serviced by a qualified repair
 When servicing a power tool, use only identical re-
3 — English
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
placement parts. Follow instructions in the Mainte-
nance section of this manual. Use of unauthorized parts
or failure to follow Maintenance instructions may create
a risk of shock or injury.