Connecting The Air Hose - Stiebel Eltron AWG 315 GL Manuel D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

INSTALLATION
mounting
f If necessary, trim the supplied insulating mat to the meas-
f
ured depth.
f Pull the insert out of the wall outlet.
f
f Pull off the foil from the self-adhesive side of the insulat-
f
ing mat.
f Affix the insulating mat to the floor of the wall outlet.
f
f Seal the gaps around the insulating mat, e.g. with silicone.
f
f Push the insert back into the wall outlet.
f
f Seal the gap between the insert and the affixed insulating
f
mat, e.g. with silicone.
4.4.2 Securing the insert
AWG 315 GL / AWG 315 SR / AWG 560 H-GL /
AWG 560 H-SR / AWG  560 V-GL / AWG 560 V-SR
2
3
AWG 315 L / AWG 560 L / AWG 600 L
3
2
1 Screw 4.2 x 32
2 Screw m5 x 10
3 Washer/disc
The insert has eight position markers.
f Screw the self-tapping screws (4.2 x 32) provided into the
f
four positions marked in the side panels, in order to con-
nect the insert to the wall outlet.
4.5 Fitting the weather grille
f Remove the protective cover that covers the opening to
f
the connectors inside the wall outlet.
f Secure the weather grille in the holes in the insert using
f
the screws provided (m5 x 10). ensure that the drip edge
of the weather grille is facing downwards.
AWG 315-600
Fit anti-drip caps (not for the AWG L)
1 Anti-drip caps
f On the l.h. and r.h. ends of the drip edge, affix the anti-
f
drip caps supplied, possibly using silicone as an adhesive.
Sealing the weather grille all around
1
f Seal the gap between the building wall and the external
f
grille.

4.6 Connecting the air hose

f AWG 560 H-GL, AWG 560 H-SR, AWG 560 V-GL,
f
AWG 560 V-SR, AWG 560 L: Adapt the shape of the hose to
match the oval wall outlet connector.
f The hose clip closure is pre-fitted to the hose clip band.
f
f Push the free end of the hose clip band into the hose clip
f
closure.
1
1 Hose clamp
2 Internal hose
3 external hose
f Slightly pull back the external hose and the thermal insu-
f
lation, so that the internal hose of the air hose protrudes
a little.
f Invert the internal hose halfway down the connector.
f
1
1
2
3
| 11

Publicité

Table des Matières
loading

Table des Matières