Dimensions - Stiebel Eltron AWG 315 GL Manuel D'installation

INSTALLATION
Specification
f Seal the transition from the internal hose to the connector f
with the self-adhesive thermal insulation tape supplied.
1 Hose sleeve
f Pull the sleeves of the sound-optimised hoses
f
(LSWP 315-4 S, LSWP 560-4 S) over the connections.
f For the sound optimised hoses (LSWP 315-4 S, LSWP f
560-4 S), use the self adhesive thermal insulation pro-
vided to seal the transition from the hose sleeve to the
connection.
12 |
f Pull the external hose and the thermal insulation below it f
over the connector.
f Tuck the thermal insulation into the outer hose in such a f
way that the thermal insulation is no longer visible.
1
1
1 Hose clamp
f Secure the air hose to the connector using the hose clip. f
f Tighten the hose clip by turning the screw in the hose clip f
closure clockwise with a screwdriver.
5. Specification
5.1

Dimensions

5.1.1 AWG 315 GL/ AWG 315 SR
5.1.2 AWG 560 H-GL / AWG 560 H-SR
95
422
627
290
725
510
AWG 315-600