EUROM Ceiling Fan 48 Manuel D'utilisation page 14

• Slide the upper protective cap over
the connection point and hanging
point to the ceiling and screw it into
place onto the piping.
Operating unit
The operating unit (220-240V~50Hz) must be installed by an electrician.
Wiring diagram
Once installation is completed, you can switch the power back on with the main
switch. Your ceiling fan is now ready for use.
Operation
Check that you have complied with all safety regulations; you can then switch on the
device by turning the operating button clockwise from OFF to HI. The fan will start to
rotate at the highest setting. By turning further, to MED or LOW, you will slow the
fan down. In order to switch the fan off, turn the button clockwise to OFF.
14