Manual Adjustment; Electronic Adjustment; Use Of Dishwasher Salt - FAVORIT 50873 Notice D'utilisation

8

Use of dishwasher salt

°dH
11 - 14
4 - 10
< 4
1) No use of salt required.
You must set the water softener manually and electronically.

Manual adjustment

The appliance is set at the factory at position 2.
1. Open the door.
2. Remove the lower basket.
3. Turn the water hardness dial to position 1
or 2 (refer to the chart).
4. Install the lower basket.
5. Close the door.

Electronic adjustment

The water softener is set at the factory at level 5.
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function buttons
A, B and C start to flash.
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons B and C go off.
– The indicator light for function button A continues to flash.
– The digital display shows the current level.
Example: digital display shows
6. Press the function button A one time to increase the water softener level by one step.
7. Press the on/off button to save the operation.
Use of dishwasher salt
CAUTION!
Only use dishwashers salt. Types of salt that are not applicable for dishwashers cause dam-
age to the water softener.
Water hardness
°TH mmol/l
19 - 25 1,9 - 2,5
7 - 18 0,7 - 1,8
< 7 < 0,7
Clarke manually
13 - 17
5 - 12
< 5
= level 5.
Water hardness setting
electronically
1 3
1 2
1)
1 1
1)