Washing Programmes - FAVORIT 50873 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the salt container and rinse aid dispenser.
3. Adjust the water hardness setting to the highest level.
4. Do a washing programme without dishes.
5. Adjust the water softener to the water hardness in your area.
6. Adjust the rinse aid dosage.

Washing programmes

Washing programmes
Programme
1)
AUTOMATIC
2)
30 MIN
INTENSIV CARE 70° Heavy soil
3)
ECO 50°
1) During the Automatic programme, the soil level of the dishes is given by how cloudy the water is. The programme
duration and consumptions can change. This depends if the appliance is fully or not and on the level of soil on
the dishes. The appliance adjusts automatically the temperature of the water during the main wash.
2) This is the perfect daily programme to clean a not fully load. Ideal for a family of 4 persons who only want to
load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes. Please refer to separate leaflet supplied, for test data.
Consumption values
Programme
AUTOMATIC
30 MIN
INTENSIV CARE 70° -
Degree of soil
Any
Crockery, cutlery,
pots and pans
Normal or light
Crockery and cutlery
soil
Crockery, cutlery,
pots and pans
Normal soil
Crockery and cutlery
Normal or light
Delicate crockery and
soil
glassware
Duration (in minutes)
-
-
Washing programmes
Type of load
Prewash
Main wash up to 45°C or 70°C
1 or 2 intermediate rinses
Final rinse
Drying
Main wash up to 60°C
Final rinse
Prewash
Main wash up to 70°C
1 intermediate rinse
Final rinse
Drying
Prewash
Main wash up to 50°C
1 intermediate rinse
Final rinse
Drying
Main wash up to 45°C
1 intermediate rinse
Final rinse
Drying
1)
Energy (in kWh)
1,1 - 1,7
0,9
1,5 - 1,7
Programme description
Water (in litres)
12 - 23
9
16 - 18
17

Publicité

Chapitres

Table des Matières
loading

Table des Matières