Technical Data; Electrical Components - Butler HL 90 Notice De Montage

All manuals and user guides at all-guides.com
HL90 EA_de_en_fr.book Seite 51 Freitag, 8. Oktober 2004 12:34 12
Visit www.butlertechnik.com for more technical information and downloads.
HL 90

Technical data

11 Technical data
Except where limit values are specified, these technical data refer to the
usual heater tolerances of ±10 % at an ambient temperature of +20 °C
and at the rated voltage.

11.1. Electrical components:

Control unit, motor, metering pump, glow plug series resistor, part load
resistor, digital timer and switch with lamp are designed for either 12 V
or 24 V.
The temperature limiter, flame monitor and glow plug components are
identical on 12 V and 24 V heaters.
The nominal voltage of the glow plug is 4.2 V.
51
www.butlertechnik.com