Initial Start-Up - Butler HL 90 Notice De Montage

All manuals and user guides at all-guides.com
HL90 EA_de_en_fr.book Seite 50 Freitag, 8. Oktober 2004 12:34 12
Visit www.butlertechnik.com for more technical information and downloads.

Initial start-up

HL 90
10 Initial start-up
After you have installed the heater, bleed the fuel supply system
carefully.
NOTE
If the fuel lines are long, it may be necessary to switch on several times
in order to fill the fuel line to the heater.
Conduct a trial of the heater to check all the connections for leaks and
to ensure that they are secure. If the heater suffers a fault during
operation, the fault must be located and remedied.
50
www.butlertechnik.com