auna Silver Star Chef Mode D'emploi page 34

EN
34
CD PLAYER
Select [CD] on the main display screen by turning the knob and pressing the
knob or with the remote navigation buttons. The display screen for the CD
function will now show [Reading...] followed by [No Disc]. Select the Open/
Close CD function on the radio or the remote. Insert your CD slightly and
drive will take CD into the system to play. The first song on the CD will now
begin to play and album artwork will display on the screen. Please note that
not all CDs will display album artwork.
CD Functions
• To skip between songs, use the [<] or [>] buttons on the radio or the
remote. Pause/Play using the button on the radio or remote.
• To skip rewind/forward through a song playing, hold down the [<<] or
[>>] buttons on the remote control and release when you wish to stop
skipping.
• To eject the CD, press the Open/Close CD function on the radio or on
the remote, as per the guidance to enter the CD.
• Press the STOP button to stop the album. This will also display how
many songs are on the album and total playing time. Press Play/Pause
to begin listening again.
Arrange a CD song program
1. When the CD is put into 'Stop', you can program the CD player to play
songs in a particular order. Simply follow by pressing the "Program"
button on the remote to step into the state of programming.
2. Once in program settings, the display will show P1 001 to display the
first song on the CD as 001. You can now choose what song you would
like as program number 001 by using the '<' and '>' buttons to scroll
through to the song you would like to choose. Once on the chosen song
for 001, press the 'Program' button to select, and be taken to choose
your next programmed song.
3. For the next song, the display will show P2 002 to show the program 2.
Now use the '<' and '>' buttons to scroll through to the song you would
like to choose. Once on the chosen for program 2, press the 'Program'
button to select, and be taken to choose your next programmed song.
On the display, the song number will show as 001 for CD song number 1,
008 for CD song number 8, 010 for CD song number 10 etc.
4. After you have finished program song selection, press the 'Play' button
to play the songs which have been programmed.
Note: Press STOP button to exit the Program when programming. When
the program playback is activated, press EJECT button, then it will exit
the program playback mode.