Fein ABS14 Mode D'emploi page 13

OBJ_BUCH-0000000113-002.book Page 13 Wednesday, June 25, 2014 8:31 AM
Changing the tool.
Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting application tools (figure 3).
Open the keyless drill chuck.
Afterwards, insert the desired application
tool.
Tighten the keyless drill chuck.
Fig. 3
2.
en
13
3.
1.