Blower Safety Warnings - GreenWorks GWG24AB Mode D'emploi

• Obtain ear protection and
safety glasses. Wear them
at all times while operating
the machine.
2.3 MAINTENANCE
• Keep all nuts, bolts and
screws tight to be sure the
power tool is in safe
working condition.
• Always allow the power tool
to cool down before storing.
• Maintain the machine with
care and keep it clean. Do
not to touch moving
hazardous parts until the
battery is removed and the
moving hazardous parts
have come to a complete
stop.
• Allow the machine to cool
before making any
inspections, adjustments,
storing etc.
• Replace worn or damaged
parts for safety. Use only
genuine replacement parts
and accessories.
English
3 BLOWER SAFETY
WARNINGS
• Operate the appliance only
in daylight or in good
artificial light.
• Keep all cooling air inlets
clear of debris.
• Never blow debris in the
direction of bystanders.
• Before starting the machine,
make certain that the tube
inlet is empty.
• Keep your face and body
away from the air intake
opening.
• Do not allow hands or any
other part of the body or
clothing inside the tube
inlet, discharge chute, or
near any moving part.
• Inspect unit to ensure no
foreign material/ debris is in
the machine prior to
operation.
• Never operate the machine
with defective guards or
shields, or without safety
devices or if the cord is
damaged or worn.
• Do not overreach. Keep
balance at all times, and
5
EN