Residual Risks; General Power Tool Safety Warnings; Preparation - GreenWorks GWG24AB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
EN
1
INTRODUCTION
Your product has been engineered and manufactured to
high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you
years of rugged, trouble-free performance.
1.1

RESIDUAL RISKS

Even when using the power tool properly, remaining
risks may exist. The following hazards may occur based
on the construction of the equipment:
Lung damage when not wearing a suitable
protective mask.
Hearing damage when not wearing suitable ear
protection.
Hand/arm damage due to vibration when you use
the equipment for extended periods, or the machine
is not properly operated and maintained.
2
GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
battery-operated (cordless) power tool.
2.1 TRAINING
• Read the instructions
carefully. Be familiar with
the controls and the correct
use of the machine.
• Never allow children,
persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
or people unfamiliar with
these instructions to use the
machine. Local regulations
WARNING
English
can restrict the age of the
operator.
• Keep in mind that the
operator or user is
responsible for accidents or
hazards occurring to other
people or their property.

2.2 PREPARATION

• While operating the power
tool always wear substantial
footwear and long trousers.
Do not operate the power
tool when barefoot or
wearing open sandals.
Avoid wearing clothing that
is loose fitting or that has
hanging cords or ties.
• Thoroughly inspect the area
where the power tool is to
be used and remove all
objects which can be
thrown by the power tool.
• Before using, always
visually inspect to see, that
fasteners are secure, the
housing is undamaged and
that guards are in place.
• Never operate the machine
while people, especially
children, or pets are nearby.
4

Publicité

Table des Matières
loading

Table des Matières