Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.3 Connections for the Base Station
Important Information:
!
The connections for the Base Station may
only be made to the switched mode power pack
included with this starter set. Other switched mode
power packs or transformers may not be used!
The Base Station requires the power pack as
a source of power. Therefore, only the power
pack (1) with the cable (2) may be plugged into the
socket on the Base Station (3).
6.4 IR Controller
4 – Lens
5 – Function buttons
6 – Speed controller
7 – Changing direction
8 – Light button
9 – Address selector switch
10 – Battery holder
ˆ
‰
…
†
‡
12
All manuals and user guides at all-guides.com
ƒ
‚
„
Š
6.5 Operating the IR Control for the First Time
Before operating this controller for the fi rst time,
2 type AAA (micro size, not included with the con-
troller) batteries must be installed in the controller.
Please see the following illustration.
Unscrew the battery holder and lift up the cover.
Install 2 type AAA (micro size) batteries as shown
in the drawing. (Batteries not included with the
controller)
1,5 V AAA
1,5 V AAA
Insert or change batteries only in pairs!
!
Pay attention to polarity!
Notes about Batteries and Rechargeable
Batteries
• Non-rechargeable batteries may not be char-
ged up.
• Remove run down batteries from the battery
pack.
Publicité
Table des Matières
