Energy Saving Tips; Using The Cooler - Dometic WAECO BordBar AS-25 Notice D'utilisation

_AS-25.book Seite 18 Montag, 16. Januar 2012 9:55 09
Operation
5.1

Energy saving tips

 Choose a well ventilated installation location which is protected against di-
rect sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the lid open for longer than necessary.
 Clean the lid seal regularly.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
5.2

Using the cooler

Caution
a
– Ensure that the objects placed in the cooler are suitable for
cooling to the selected temperature.
– Ensure that food or liquids in glass containers are not exces-
sively refrigerated. Liquids expand when they freeze and can
therefore destroy glass containers.
– Ensure that your cooler is well ventilated so that any heat creat-
ed can dissipate. Otherwise proper functioning cannot be en-
sured. It is especially important not to cover the air vents.
– Risk of spillage. Lift the cooler by the handle, not by the shoul-
der strap.
Note
I
If the handle is folded back of if the cooler is being carried, the lid
is locked. You can only open the lid when the handle is folded for-
wards.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (2 1, page 3) into the cigarette light-
er socket or a 12 V socket in the vehicle
or
➤ Plug the 220-240 V connection cable (2 2, page 3) into the AC voltage
socket and connect it to the 220-240 V AC mains supply.
18
All manuals and user guides at all-guides.com
BordBar AS-25
EN