Setting The Timer 1 - Teac SL-D900 Manuel Du Propriétaire

TIMER
Adjust the clock before setting the timer.
If the power supply is interrupted, the settings
kept in memory (clock, preset stations, timer
setting) will be erased.
1 Press and hold the TIMER button until "TIMER"
and "ON" indicators appear on the display.
The "hour" value starts flashing.
< When no button is pressed for 10 seconds, the timer
setting mode will be cancelled.
2 Press the SKIP button (.//) to set the start
time (hour), and then press the TIMER button.
The "minutes" value starts flashing.
All manuals and user guides at all-guides.com

Setting the Timer 1

SKIP
3 Press the SKIP button (.//) to set the start
time (minute), and then press the TIMER button.
"TIMER" and "OFF" indiactors appear on
the display and the "hour" value starts
flashing.
4 Press the SKIP button (.//) to set the stop
time (hour), and then press the TIMER button.
The "minutes" value starts flashing.
5
Press the SKIP button (.//) to set the stop
time (minute), and then press the TIMER button.
23