Fracarro SHIELD C Mode D'emploi page 26

All manuals and user guides at all-guides.com
CONFIGURATION 2
LEFT AND CENTRAL BEAMS
In the second configuration two beams
oriented towards the left and at 90 ° are used.
It is obtained by rotating the tilting
mechanism in position 1 and sliding the cover
onto the lens in position D.
CONFIGURATION 4
RIGHT AND CENTRAL BEAMS
In the fourth configuration two beams are
oriented towards the right and at 90 ° between
them. It is obtained by rotating the tilting
mechanism in position 3 and sliding the cover
onto the lens in position A
26
CONFIGURATION 3
CENTRAL BEAM
In the third configuration only a front beam is
used and perpendicular to the installation
wall. It is obtained by rotating the tilting
mechanism in position 2 and sliding the
cover onto the lens in position D.
CONFIGURATION 5
RIGHT BEAM
In the fifth configuration only one beam is
used to the right and is obtained by rotating
the tilting mechanism in position 3 and
sliding the cover on the lens in position C.
NOTE:
In this configuration
the anti-masking
system can not be
Fig. 31 used.