Installing The Product; What's In The Box; Parts Identification - Fracarro SHIELD C Mode D'emploi

All manuals and user guides at all-guides.com

WHAT'S IN THE BOX

Part. Identification
A
Detector
B
Bracket
C
Wall fixing Kit
D
Intructions
Part.
A
Detector on wall fixing screws.
B
Cover fixing screw.
C
Cover with Fresnel lens.
D
Adjusting knob for lower PIR2.
E
Electronics and support, with possibility of rotation of 150 °.
F
Antitamper micro switch (only if fixed with screw A).
G
Stainless steel wall fixing bracket.
"U" brackets (q.ty 2) - (not supplied) contained in the accessory
H
kit cod. 998989
Metric M4 x 6 stainless steel screw for fixing "U" brackets (q.ty
I
4) included in the accessory kit cod. 998989
M4 x 10 stainless steel metric screws (q.ty 4) included in the
L
accessory kit cod. 998989
Fix the detector to the support (G) using the two screws (A). In particular, the mounting screw, close to the micro switch,
ensures, also the anti tamper protection.
Do not touch the filter lenses on the PIR's when handling the detector.
17

4. INSTALLING THE PRODUCT

PARTS IDENTIFICATION

Table 1
Identification
Fig. 1
Fig. 2