All manuals and user guides at all-guides.com
Fig. 6
CORRECT INSTALLATION
Position the detector vertically and perpendicularly to the ground
Fig. 8
WRONG INSTALLATION (detector tilted downwards)
If the detector is not installed perpendicularly to the ground, as shown, operational reliability may result decreased.
Fig. 9
WRONG INSTALLATION (detector tilted upwards)
If the detector is not installed perpendicularly to the ground, as shown, operational reliability may result decreased
Fig. 10
19
FIG. 6 - Locate the detector body on the
metallic support and slide It down, then fix
it using the supplied screws.
In order to obtain a passage for the cables,
break the plastic pre-cut using a pointed
object of appropriate diameter, screwdriver
or similar.
FIG. 7 - Adjust PIR2 and MW, close the
detector inserting downwards the coverage
as shown in figure.
Fix the cover using the metric screw.
Fig. 7