Declaration Of A Standards Conformity; Technical Data; Packing And Device Check - Bartscher A203.097 Mode D'emploi

DECLARATION OF A STANDARDS CONFORMITY

The producer confi rms that the devices agree with 2004/108/ES, 2006/95/ES standards, rule nr. 616/2006
sb., 17/2003 sb. and with relevant goverment orders. Instalation must be done with respect to valid standards.
Attention, the producer refuses any responsibility in case of direct or indirect damages which are caused due
to wrong instalation, incorrect intervention or modifi cation, insuffi cient maintenance, incorrect use and also
possibly caused by other reasons presented by items in sale conditions. This appliance is set only for skilled
use and must be operated by qualifi ed persons only. Parts set and secured by the producer or accredited
person must not be rebuilt by user.

TECHNICAL DATA

Label with technical data is placed on the back side of the device. Study the electrical diagram of connection
and all following information before instalation.
MODEL VOLTAGE (V/HZ)
VEN - 510
VEN - 810
VEN - 520
VEN - 820
VEC - 510
VEC - 810
VEC - 520
VEC - 820

PACKING AND DEVICE CHECK

The device leaves our stocks properly packed with appropriate symbols and labels. There are also appropriate
instructions for use. In case the packing shows bad handling or damage, it must be reclaimed at transporter
immediately by writing and signing of a damage protocol.
Important notice:
• this instructing guide must be read properly and carefuly because it contains important information about
safety elements, instalation, use
• these recommendations refer to this product
• this product corresponds with valid standards
• this guide must be properly deposited for future use
• keep the children away from manipulation with the product
• when selling or moving the product to another place it is necessary to make yourself sure that the staff or the
professional service has got acquainted with control and instalation instructions from enclosed guide
• only authorised person can operate the product
• can be use only for storage of pastry,
• it cannot be switched on without supervision
• we recommend to have the product checked by proffesional service min. once a year
• only original spare parts can be used for repairs
• the product cannot be cleaned by the water jet or pressure shower
• by damage or break down disconnect all the feeders (water, gas, electricity) and call proffesional service
• producer refuses any responsibility in case of damages caused by wrong instalation, by disobserving of above
mentioned recommendations or by other use etc.
Technical instructions for instalation and regulation:
Can be used ONLY by specialized technicians Following instructions apply to the technician specialized in
instalation to do all the operations in the most correct way and according to the valid standards.
WATTAGE (W)
230 / 50 400
230 / 50 700
230 / 50 400
230 / 50 700
DIMENSIONS (CM)
50 x 35 x 20 h
80 x 35 x 20 h
50 x 35 x 34 h
80 x 35 x 20 h
50 x 35 x 27 h
80 x 35 x 20 h
50 x 35 x 41 h
80 x 35 x 20 h
3