Before You Begin; Tools And Parts Needed; Parts Included; Power Requirements - Bosch HBE5451UC Manuel D'installation

Before you begin

Tools and parts needed

Philips head screwdriver
▯
1/8" drill bit and drill
▯
Measuring tape
▯

Parts included

Built-in oven

Power Requirements

The outlet must be properly grounded in accordance with
all applicable codes.

Removing Packaging

NOTICE: To prevent damage to your floor keep the unit
in its packaging base until ready to be placed in the
cabinet opening. Do not slide the unit across the flooring.
Different models use different packaging materials.
Actual brackets may look differently. Bracket remains in
packaging base.
Cut straps on outside of box.
1.
Remove cardboard box.
2.
Remove all top and side cardboard and Styrofoam
3.
braces.
Place oven in front of cabinets where it is to be
4.
installed.
B e f o r e y o u b e g i n

Preparing the units

Safe use of this appliance can only be guaranteed if it
▯
has been installed professionally in accordance with
these installation instructions. The installer shall be
liable for damages incurred as a result of incorrect
installation.
Fitted units must be heat-resistant up to 195°F (90°C),
▯
and adjacent unit fronts up to 160°F (70°C).
Cut-out work on the units and worktop should be
▯
performed before fitting the appliances. Remove any
shavings as they may impair the function of the
electrical components.
5