BASETech 1437197 Mode D'emploi page 57

All manuals and user guides at all-guides.com
c) Setup for WLAN with the Smart configuration mode
To wirelessly connect the outdoor unit to your network by WLAN using the mode "Smart
Config", proceed as follows.
If you have any problems with this, use the AP mode instead. It is described in the next chapter.
Connect:
• If you have not done so yet, plug the mains adapter into a mains socket for voltage supply of
the outdoor unit. The lighting of the name tag or the doorbell button comes on.
• Wait until the red LED at the rear flashes slowly.
Setup:
The following setup was performed with an Android
ple device instead, the configuration is nearly identical.
• Open the previously installed app "MyDoor".
• Tap the + to add a new camera.
Smartphone. If you use an Ap-
TM
47