Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INsTALLATIoN
Installation
f Use the knurled screws included in the standard delivery
f
to secure the internal panel base plate to the wall mount
casing.
f Fit the internal panel cover on the base plate with a 45°
f
offset.
f Rotate the internal panel cover 45° clockwise.
f
Note
Only open the internal panel just before commissioning.
Internal sound insulation panel
1 Spring button
f Press and hold the spring button underneath the internal
f
sound insulation panel.
f Pull the bottom of the internal sound insulation panel away
f
from the wall mounting frame.
34
| LWE 40
f Lift the internal sound insulation panel up and off the two
f
stop bolts.
2
1 Sealing tape
2 Wall mounting frame
f Affix the sealing tape included in the internal panel standard
f
delivery around the back of the wall mounting frame and into
the wall mounting frame. The sealing tape must be in contact
at the side with the back-facing tabs of the wall mounting
frame.
1
f Screw the wall mounting frame to the wall mount casing.
f
1
www.stiebel-eltron.com
Publicité
Chapitres
Table des Matières
Dépannage
