Festo VIA 03-FB Serie Notice Simplifiee page 11

VIA...-03-FB-...
1
User instructions
The analogue input/output modules PROP and ADDA are exclu-
sively designed for use on valve terminals type 03...05 with the
following fieldbus nodes:
–
FB6 (INTERBUS-S)
–
FB9 (PROFIBUS DP)
–
FB13 (PROFIBUS DP)
–
SB50 (Simatic-PLC integrated)
–
SF3 (Festo-PLC integrated)
The limit values of the technical specifications must be
observed.
Please refer to the "Pneumatics manuals" P.BE MIDI/MAXI-...
and P.BE ISO-... and the manual "Analogue input/output mo-
dules" P.BE VIAX-03/05... for detailed information.
WARNING
• Switch off the power supply before you connect or
disconnect plugs (danger of functional damage).
• Connect a protective earth conductor with sufficient cross
section to the connection marked with
valve terminal is not fitted on an earthed machine stand.
PLEASE NOTE
Only operate a valve terminal which is completely fitted and
electrically wired.
0503a
, if the
11