Bosch MaxxiMUM MUMXX Serie Notice D'utilisation page 8

MUMXX_en-fi.book Seite 8 Montag, 8. September 2014 3:05 15
en
When the height has been set

correctly, press the release button
and move the multi-function arm
to position 1.
Hold whisk in place and tighten

nut anti-clockwise using enclosed key.
Working with the bowl
and the tools
Press release button and move

multi-function arm to position 1.
Cover unused drives with drive

covers.
Insert the bowl:

– Tilt the bowl forwards and then
set it down.
– Turn anti-clockwise until it locks into
place.
Depending on the process task, insert

stirrer, whisk or kneading hook firmly into
the drive until it locks into position.
Note:
If using the kneading hook, first insert
dough deflector, then the kneading
hook (Fig. –4b).
Note shape and position of the parts.
Put the ingredients to be processed

into the bowl.
Press release button and move

multi-function arm to position 2.
Attach the cover.

Insert the mains plug.

Set the rotary switch to the desired

setting.
Our recommendation:
– Stirrer:
First mix at setting 1–2, then setting
3–7 as required
– Whisk:
setting 7, mix in at setting 1
– Kneading hook:
first stir in at setting 1, knead at setting 3
Adding more ingredients
Switch off the appliance with the rotary

switch.
Attach funnel (Fig. –7).

Top up ingredients through the funnel.

8
All manuals and user guides at all-guides.com
or



After using the appliance

Fig. 






Working with SensorControl
Your appliance features automatic
SensorControl.
When you are making whipped cream and
egg whites using the whisk, sensors monitor
the beating process and automatically switch
the appliance off when a defined consistency
is reached. The age, the temperature and the
contents of the cream affect the time required
and the result.
Note:
Before using the automatic SensorControl for
the first time, the food processor must have
been running for at least two minutes to ensure
that the sensors function correctly.
Fig. 







Remove lid.
Press release button and move
multi-function arm to position 1.
Add ingredients.
Switch off the appliance with the rotary
switch.
Remove mains plug.
Remove lid.
Press release button and move multi-
function arm to position 1.
Take the tool out of the drive.
Remove the bowl.
Clean all parts, see "Cleaning and
servicing".
Prepare the appliance as described
above.
Insert the whisk into the drive until
the whisk locks into position.
Adjust the whisk until it just touches
the bottom of the bowl.
see section "Important information
on using the whisk".
Press release button and move
multi-function arm to position 2.
Attach the cover.
Attach funnel (Fig. –3).
Insert the mains plug.
Robert Bosch Hausgeräte GmbH