Paper Jam; Minimum System Requirements - HP Deskjet D4300 Serie Guide De Référence

Paper jam

1. Remove the paper from the paper tray.
2. If you are printing labels, verify that a label did not
become detached from the label sheet while passing
through the printer.
3. Turn off the printer.
4. Disconnect the printer power cord from the electrical
outlet.
5. Remove the rear access door. Press the handle to the
right, and then pull out the door.
6. Remove the paper jam from the back of the printer, and
then replace the rear access door securely.
7. If the paper jam cannot be removed from the back of the
printer, raise the printer cover, remove the paper jam from
the front of the printer, and then lower the cover.
8. Reload paper in the paper tray.
9. Reconnect the printer power cord to the electrical outlet.
10. Turn on the printer.
11. Reprint the document.
Ink usage
Note: Ink from the cartridges is used in the printing
process in a number of different ways, including in the
initialization process, which prepares the device and
cartridges for printing, and in printhead servicing, which
keeps print nozzles clear and ink flowing smoothly.
In addition, some residual ink is left in the cartridge after
it is used. For more information see
www.hp.com/go/inkusage.
All manuals and user guides at all-guides.com
Print job stuck in queue (Windows)
If the printer stops printing before the job is complete, the print
job might be stalled in the print queue.
•
•
•
Verify that you are using the default printer to print your
documents. Check the Printers or Printers and Faxes folder
on your computer and make sure your printer icon has
a check mark next to it. If you have multiple icons of the
same printer, delete the extra icons.
Make sure that your printer is not set to pause printing.
Right-click the printer icon and check the shortcut menu.
If the print service has stopped responding, locate the
Administrative Tools folder on your computer, double-click
Services, and then double-click Print Spooler. Click Stop,
and then click Start to restart the print service.

Minimum system requirements

For information on minimum system requirements,
see the Readme. To access the Readme file, click Start >
All Programs > HP > Deskjet D4300 series > Readme.