Paper Jam; Minimum System Requirements - HP Deskjet D2400 Série Guide De Référence

Paper jam

1. Remove the paper from the paper tray.
2. If you are printing labels, verify that a label did not
become detached from the label sheet while passing
through the printer.
3. Turn off the printer.
4. Disconnect the printer power cord from the electrical
outlet.
5. Remove the rear access door. Press the handle to the
right, and then pull out the door.
6. Remove the paper jam from the back of the printer, and
then replace the rear access door securely.
7. If the paper jam cannot be removed from the back of
the printer, raise the printer cover, remove the paper
jam from the front of the printer, and then lower the
cover.
8. Reload paper in the paper tray.
9. Reconnect the printer power cord to the electrical outlet.
10. Turn on the printer.
11. Reprint the document.

Minimum system requirements

For information on minimum system requirements, see the
Readme.
Ink from the cartridges is used in the printing process in
a number of different ways, including in the initialization
process, which prepares the device and cartridges for
printing, and in printhead servicing, which keeps print
Print job stuck in queue
(Windows)
If the printer stops printing before the job is complete, the
print job might be stalled in the print queue.
• Verify that you are using the default printer to print your
documents. Check the Printers or Printers and Faxes
folder on your computer and make sure your printer icon
has a check mark next to it. If you have multiple icons of
the same printer, delete the extra icons.
• Make sure that your printer is not set to pause printing.
Right-click the printer icon and check the shortcut menu.
• If the print service has stopped responding, locate the
Administrative Tools folder on your computer, double-
click Services, and then double-click Print Spooler.
Click Stop, and then click Start to restart the print
service.
Photosmart Essential button - no
response
If nothing happens when you press the Photosmart Essential
button, install the HP Photosmart Software that came with
your printer. If it is installed, restart your computer.
nozzles clear and ink fl owing smoothly. In addition, some
residual ink is left in the cartridge after it is used. For more
information, see www.hp.com/go/inkusage.