lamber GS5-ek Instructions D'emploi page 23

and draining tank. Alternatively are flashing the 3
control lamp .
ACHIEVEMENTS
Any deficiency in the washing process is
apparent when dirty residuals are visible. Any
halos might be caused by an insuffucuent
rinsing: in this case, check that the rinsing jets
are clean and there is a sufficient pressure in
the water distribution network.
In the case that residuals are present, check
that:
• the washing jets are clean
• there is detergent
• the positions of the objects in the rack are
correct.
RINSING ADDITIVES
To grant a perfect rinsing, a quick drying and to
avoid calcareous sediments on glasses and
cups you must add a surfactant on water
(Brightner).
Your cleansing agent supplier's will be able to
suggest the most suitable
machine is equipped with a rinse-aid dispenser.
Mean concentration used is 0,15.
DISHES POSITIONING
It is suitable to place dishes, inside the plastic
basket with the concave side towards the
bottom of the washing tank (see draw).
It is suitable to place glasses, inside the plastic
basket with the concave side towards the
bottom. Place mixed cutlery in a vertical position
into the suitable container minding not to cram
them and whit hafts towards the bottom (see
draw).
All manuals and user guides at all-guides.com
product. Your
22
DRAIN PUMP INSTRUCTION
The drain pump starts up automatically just
during the washing cycle to discharge the
exceeding water coming from the rinsing cycle.
At the end of the working day, in order to
completely discharge the tank, it is necessary
to perform the following operations:
1. Open the door of the dishwasher
2 Afterwards push button "F" for 3 seconds.
Alternatively are flashing the control lamp "E" and
the cycle lamp (chosen before)
The discharge will stop automatically after 1
minute. The control lamp "E" will flash slowly.
3. Disconnect the machine with pushbutton "A";
Please note: in case the door is open the control
lamp "E" will continue flashing.