Kathrein UFO 331/TP Mode D'emploi page 20

1.6 Selecting the output level
The output channel unit is selected using the "<" and ">" buttons.
A 1236
27.500 MS/s
Outp. S21
8 MHz
Main menu
The output level can be adjusted in 40 steps from a maximum level "0" to "-40" using the output channel sub-menu.
Pressing the "Sub-menu" button
The output level is selected using the "<" and ">" buttons and adjusted using the "+" and "-" buttons.
1.7 Switching output on/off
The output channel unit is selected using the "<" and ">" buttons.
A 1236
27.500 MS/s
Outp. * S21
8 MHz
Main menu (output I switched off)
The output can be switched on and off using the output channel sub-menu.
The following settings are available: on, off
Pressing the "Sub-menu" button
The output is selected using the "<" and ">" buttons and adjusted using the "+" and "-" buttons.
When the output is switched off an indicator "*" is shown in the main menu, on the left beside the output channel.
1.8 Selecting the output channel bandwidth
The output channel bandwidth is selected using the "<" and ">" buttons.
A 1236
27.500 MS/s
Outp. S21
8 MHz
Main menu
Use the "+" or "-" keys to set the output channel bandwidth to the values 6 MHz, 7 MHz, or 8 MHz.
MHz TP
3/4 QPSK
306.00 MHz
QAM64
activates the sub-menu; pressing the "Sub-menu" button
MHz TP
3/4 QPSK
306.00 MHz
QAM64
activates the sub-menu; pressing the "Sub-menu" button
MHz TP
3/4 QPSK
306.00 MHz
QAM64
***
Frequency
Level
! Output
***
Frequency
Level
! Output
!
6 / 14
UFO331TP
306.00 MHz
0
On
"Output channel" sub-menu
again deactivates it.
UFO331TP
306.00 MHz
0
Off
"Output channel" sub-menu
again deactivates it.
***
***