Falcon 1000 DF Guide De L'utilisateur page 23

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
c) Remove 3 screws securing element to frame and
carefully withdraw element until access can be made
to the electrical terminals.
d) Disconnect terminals taking care not to allow the
cable to fall down the rear of the appliance.
e) Re-assemble in reverse order.
23 To Remove Oven Fan
a) Isolate from electric supply.
b) Proceed as 'To Remove Oven Element'.
c) Remove 4 fi xing screws securing fan assembly to
frame.
d) Withdraw fan assembly suffi ciently to gain access to
motor electrical terminals and disconnect cables.
e) Remove fan blade.
NOTE: Fan blade fi xing nuts is left handthread.
f) Remove motor from mounting plate screws.
g) Re-assemble in reverse order.
24 To Remove a Grill Element
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the
rear of the appliance. Remove the fi xings that secure
the cover and lift it clear.
b) Undo the terminal connections, noting their positions.
c) Remove the grill pan.
d) Remove the fi xings that secure the element front
support from within the chamber.
e) Remove a fi xing from each of the elements and
withdraw the elements from the chamber.
f) Fit the replacement element(s) and re-assemble parts
in reverse order. Check operation of the grill.
All manuals and user guides at all-guides.com
SERVICING - WARNING
23