Beyerdynamic MCW DIGITAL 200 Notice D'utilisation page 49

2.2 Multilingual Meetings / Interpreting Applications
For multilingual meetings or interpreting applications you must complete the MCW-D 200 control unit with the CA
2451 PCB for analogue individual inputs and outputs.
Important:
The CA 2451 PCB is installed at the factory or at a local authorized distributor in your country.
Using the CA 2451 PCB the audio signals of the individual microphone units are available separately and the individual audio
inputs can be used for the aural channels in interpreting applications (original sound and foreign languages). Depending on the
number of the installed CA 2450 PCBs (1 transmitting/receiving channel), it is possible to listen to separate audio signals of max.
7 switched on microphone units and max. 8 audio signals for the aural channels.
The pin connection corresponds to Tascam-DA-XX-Recorders. As an input cable (25-pin Sub-D, male to XLR, female) use a
standard cable of the type Tascam CU SD 303 (3 m) or Tascam CU SD 305 (5 m).
As an output cable (25-pin Sub-D, male to XLR, male) use a standard cable of the type Tascam CU SD 203 (3 m) or Tascam CU SD
205 (5 m).
Important:
• The max. input level is +6 dBm; i.e. the connected device must not produce a higher signal even with loud passages.
2.3 CA 2452 Digital Inputs and Outputs AES/EBU and S-PDIF
This PCB is not yet available.
49