Remove And Replace The Handle (On Some Models); Door Removal & Replacement - Whirlpool WSR57R18D Manuel D'utilisation

Remove and Replace the Handle (on some models)

To Remove the Handle:
1. Loosen the setscrews located on the side of handle at each end. See "Door Swing Reversal and Handle Removal" graphic.
2. Remove the handle from the grommets.
To Replace the Handle:
1. Place the handle onto the grommets, making sure the grommets are fitted into the handle holes.
2. Tighten the upper and lower setscrews with the hex key provided. See "Door Swing Reversal and Handle Removal" graphic. Do not
overtighten the setscrews.
Door Removal & Door Swing Reversal and Handle Removal (optional)
Replacement
10
In some European factories the letter "W" of the part code mentioned herein will be automatically
17-Mar-2021 07:46:05 EDT | RELEASED
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")