Troubleshooting Guide; Ordering Replacement Parts - Nutri Ninja BL480D Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting Guide

PROBLEMS
Unit doesn't turn on
Unit doesn't turn off
Lid/Pro Extractor Blades
Assembly hard to assemble
Food is not evenly chopped
Doesn't mix well, food gets
stuck.
Unit moves on counter while
blending
Unit is difficult to remove from
counter for storage
Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer
service: 1-877-646-5288.
15
1-877-646-5288
All manuals and user guides at all-guides.com
POSSIBLE REASONS & SOLUTIONS
Make sure the unit is plugged in
Insert and rotate cup clockwise in the base until it "clicks". Display
should turn on.
Remove cup from base by rotating cup counter clockwise and lifting out.
Display should turn off. Unplug the power cord from the outlet.
Set the cup on a level surface. Place the lid or Pro Extractor Blades
Assembly on the top of the cup and align the threads so that the lid/
blades sit flat on the cup. Twist clockwise so that the lid/blades evenly
align to the cup until you have a tight seal.
For best results when chopping, make sure all ingredients are as dry
as possible. Cut pieces down to even sizes, and reduce the amount of
food in the cup. Use very short pulses by quickly pressing the "PULSE"
button.
Using the AUTO-iQ
results. The pulses and pauses allow the food to settle towards the
blade. If food is routinely getting stuck adding some liquid will usually
help.
When packing the cups, start with fresh items, then powders/nuts. Add
liquids, and finally frozen items or ice.
Make sure the surface as well as the feet of the unit are clean and dry.
Tip unit forward from the back to easily disengage the suction feet.
programs is the easiest way to achieve great

Publicité

Table des Matières
loading

Table des Matières