Care & Maintenance; How To Clean; Resetting The Motor Thermostat - Nutri Ninja BL480D Manuel Du Propriétaire

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any attachment and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2 Hand Washing: Wash the lids, Nutri Ninja
Pro Extractor Blades ® Assembly in warm, soapy water.
When washing the Pro Extractor Blades Assembly, use
a dish-washing utensil with a handle to avoid direct
hand contact with blades. Handle Pro Extractor Blades
Assembly with care to avoid contact with sharp edges.
Rinse and air dry thoroughly.
Dishwasher: The Nutri Ninja cups, lids, and Pro
Extractor Blades Assembly are all dishwasher safe.
The lids and Pro Extractor Blades Assembly are top
rack dishwasher safe. Ensure the Pro Extractor Blades
Assembly is removed from the cup before placing in the
dishwasher.
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp. Contact with the blades' edges can
result in laceration.
3
Wipe the motor base clean with a damp cloth
If the appliance needs servicing, please call customer
service at 1-877-646-5288.
All manuals and user guides at all-guides.com
1
cups and
®
1
2
3
4
5
HOW TO STORE
Store the Nutri Ninja with AUTO-iQ
®
blade assembly inside the corresponding container
with the lid secured on top. Do not place anything
on top. Store the rest of the attachments in a safe
place where they will not be damaged and won't cause
harm. Loosely wrap the power cord around the motor
base.

RESETTING THE MOTOR THERMOSTAT

The Nutri Ninja with AUTO-iQ features a unique safety
system which prevents damage to the unit's motor
and drive system should you inadvertently overload
your appliance. If the appliance is being overloaded,
the motor will stop. To reset the appliance, follow the
resetting procedure below:
Unplug the appliance from the electrical outlet.
Remove and empty the cup and ensure that no food is
jamming the Pro Extractor Blades Assembly.
Allow the appliance to cool for approximately 30
minutes.
Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
Proceed to use the appliance as before while making
sure not to exceed the recommended maximum
capacities.
www.ninjakitchen.com
upright with the
™
14