Care & Maintenance; Cleaning; Storing; Resetting The Motor Thermostat - Nutri Ninja BlendMax DUO BL2000 Serie Instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARE &
MAINTENANCE

CLEANING

Separate all parts.
1
2 Wash all containers in warm, soapy water
with a soft cloth.
3 Hand Washing
Wash blade assemblies in warm, soapy
water using a dishwashing utensil with
a handle to avoid direct contact with the
blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
Dishwasher
All attachments are dishwasher safe. It
is recommended that the lids and blade
assemblies be placed on the top rack of the
dishwasher. Ensure that blade assemblies
are removed from their containers before
placing in the dishwasher. Exercise care
when handling blade assemblies
4 Wipe the motor base with a clean, damp
cloth. Allow time to dry before operation.

STORING

Store the unit upright and store all blade
assemblies inside or attached to their respective
containers with their lids locked into place.
DO NOT store blended or unblended
ingredients in the Nutri Ninja
blade assembly attached.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside the
appliance or in a cabinet where they will not be
damaged or create a hazard.
Cup with the
®

RESETTING THE MOTOR THERMOSTAT

This appliance features a unique safety system
that prevents damage to the motor and drive
system should you inadvertently overload the
appliance. If the appliance is overloaded, the
motor will be temporarily disabled. Should this
occur, follow the reset procedure below.
1
Unplug the appliance from the
electrical outlet.
2 Allow the appliance to cool for
approximately 15 minutes.
3 Remove the container lid and blade assembly.
Empty the container and ensure no ingredients
were jamming the blade assemblies.
4 Reset the unit in accordance with the
applicable instructions for the container
and blade type.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
n i n j a k i tc h e n . c o m
20

Publicité

Table des Matières
loading

Table des Matières