Care & Maintenance; How To Clean; Resetting The Motor Thermostat - Nutri Ninja BL450EU Notice D'utilisation

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Use caution when handling the blade
assemblies as the blades are very sharp.
1
Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and wipe dry.
3
Place cups in the dishwasher. Place the lids, and
attachments on the top rack.
4 Carefully hand wash the lids, Nutri Ninja
assemblies in warm, soapy water with a soft cloth.
30
OR
cups, and blade
®
HOW TO STORE
1
Store the Nutri Ninja Pro Blender upright. Secure the
power cord underneath the base by wrapping the cord
around the cord wrap. Do not place anything on top.
Store the cups and the rest of the attachments along
side the appliance where they will not be damaged and
won't cause a hazard.

RESETTING THE MOTOR THERMOSTAT

The Nutri Ninja Pro Blender features a unique safety
system which prevents damage to the unit's motor
and drive system should you inadvertently overload
your appliance. If the appliance is being overloaded,
the motor will stop. To reset the appliance, follow the
resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no food is
jamming the cutting blades.
3
Allow the appliance to cool for approximately 30 minutes.
4
Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before while making sure
not to exceed the recommended maximum capacities.