Whirlpool CGD9060 Instructions D'installation page 12

CODE
PREWASH LENGTH
A1. 00
A1. 00 This is the number of minutes of PREWASH.
Choose 0 to disable the prewash or select between
2 and 7 minutes by pressing the HOT button.
Press the WARM button once to advance
J
to next code.
If cycle counter (9 0C) is selected, the following is true:
1 00 Represents the number
of cycles in HUNDREDS
2 00 Represents the number
of cycles in ONES
This is "VIEW ONLY" and cannot be cleared.
Press the WARM button once to advance to next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00 Number of dollars
in HUNDREDS
4 00 Number of dollars in ONES
5 00 Number of CENTS
END OF SET-UP PROCEDURES
EXIT FROM SET-UP MODE
J Close the service access door.
J Disconnect washer from power before reinstalling the AA1
connector, if it was removed.
J Remove the manual set-up card.
12
All manuals and user guides at all-guides.com
EXPLANATION
1 02 = 200
2 25 =
TOTAL CYCLES = 225
3 01 = $100.00
4 68 = $ 68.00
5 75 = $
TOTAL = $168.75
25
.75