E-Bike E3000 Mode D'emploi Et D'entretien page 81

5.13 CURRENT SHOW (see Fig. 5.2):
It shows the current controller of the discharge current, each grid shows
for 2A, 6 grids show 12A or more.
5.14 RIDING MODE SELECTION(Fig.5.3):
Three modes: POWER, NORMAL AND ECO. The arrow
Near the mode shows the selection. NORMAL is the
default setting.
POWER: under the assistance mode, the e-bike max speed
is top speed.
NORMAL: under the assistance mode, the e-bike Max
speed is 64% of top speed.
ECO: under the assistance mode, the e-bike Max speed
is 58% of top speed.
5.15 REAL-TIME SPEED:
Display shows the real-time riding speed, the Kilometer and
Mile can be selected by SET 4.
5.16 6KM/H:
Long press the key "-" 2 seconds then the 6KM/H function
start, the icon will be displayed on the screen. It means
even though you don't pedal the bike forward, the bike can
start moving directly at max speed of 6KM/H only, provided
this button is kept pressing. As soon as this button is
released, the bike will stop immediately.
5.17 PAS LEVEL SELECTION:
Press "+" or "-" to change the assistance level, 1 level is
the default setting.
5.18 ERROR CODE INDICATOR:
When the system fails, the error icon and error code will
flicker at the frequency of 1Hz.
Different fault codes represent different fault information.
(Fig5.2)
(Fig.5.3)
(Fig 5.4)
(Fig 5.5)
(Fig 5.6)
(Fig 5.7)
81/89