E-Bike E3000 Mode D'emploi Et D'entretien page 74

Ⅰ. Conditions for riding:
This E3000 is designed for riding on road or riding on a paved surface where the tyres do not lose ground
contact. It must be properly maintained according to the instructions found within this book;
The maximum weight of the rider and load is required to be less than 100kg.
Safe cycling and safety tips:
Before you ride this e-bike, always make sure it is in a safe operating condition. Particularly check that your:
• Nuts, bolts, quick-release and parts refastened tight and not worn or damaged
• Riding position is comfortable
• Brakes are operating effectively
• Steering is free with no excessive play
• Wheels run true and hub bearings are correctly adjusted
• Wheels are properly secured and locked to frame/fork
• Tyres are in good condition and inflated to correct pressure
• Pedals are securely tightened to pedal cranks
• Gears are correctly adjusted
• All reflectors are in position.
WARNING WHEELS: Every six months, your pedal electric assistance bicycle should be
professionally checked to ensure that it is in correct and safe working order. It is the
responsibility of the rider to ensure all parts are in working order prior to riding.
REGULAR ATTENTION MUST BE PAID TO THE SPOKE TENSION.
Warning: You are warned that you assume the risk for personal injury, damage or losses if
you breach the above conditions and, the warranty will be void automatically.
74/89