E-Bike E3000 Mode D'emploi Et D'entretien page 78

3. OPERATION
E3000 is a revolutionary transport means, applying aluminum frame, Li-ion battery, a super high efficiency
electric motor and controller with electric pedal assistance system, to support normal pedaling. The above-
mentioned equipment will ensure safe riding with excellent function and performance. It is important for
you to note the following guidelines to ensure getting the best possible experience from your electric
bicycle.
Checklist before riding
3.1. Please ensure tyres are fully inflated as indicated on the tyre-wall, before riding.
Remember, performance of the bike is directly related to the weight of the rider and baggage/load,
together with the stored energy in the battery;
3.1.2 Charge overnight, prior to riding the next day;
3.1.3 Apply chain oil periodically and clean if dirty or gummed up, using degreaser, then wipe clean and oil
bicycle chain again.
4. BATTERY INSTALLATION & USAGE.
The electric bikes have the battery positioned onto the frame down tube (the battery pack is directly
connected to the controller box which is under battery bottom (fig 2 - Fig 2.3).
1. Lift the battery above the frame down tube, aligned position of battery slides and controller on the tube
horizontally.
2. Put the battery on the slide, slide down to the bottom position of the main controller, ensure a snug fit.
Make sure the battery pack is firmly pushed into the controller housing and its connector is securely
inserted
Fixing the battery well, use the key to lock the battery with slide.
4. Remove the keys, see the following pictures for reference.
Pic 2 Pic 2.1 Pic 2.2
78/89