Using The Microphone - Panasonic WX-ST200P Mode D'emploi

Using the microphone

1
Make sure that the receiver is turned ON
Make sure that the [POWER] indicator on the wireless receiver lights green.
Power indicator
2
Turn the power switch on the microphone to ON to power the
microphone
The [PWR] indicator on the microphone lights up.
When the microphone is turned ON, the audio
collected by the microphone unit is transmitted.
⚫ If the [PWR] indicator on the
microphone blinks red, the microphone
is not paired to a wireless receiver.
Perform the steps described in "Pairing"
(page 19).
⚫ After use, return the power switch on the microphone to the OFF position.
Slide the power switch in the direction opposite to ON to turn the microphone OFF.
The [PWR] indicator goes off.
Microphone
unit
Power indicator
Power switch
27