For Your Safety; Safety Instructions; Information For Operation - Würth POWERQUAD M AC/R Traduction Des Instructions De Service D'origine

GB
Please read and comply with this
instruction manual prior to first use of
your device.
Keep these operating instructions for
later use or for a subsequent owner.
Note
Modification of the device or manu-
facturing of additional devices is not
permitted. Such modifications can re-
sult in personal injury or malfunctions.
Only appointed and trained personnel may
■
carry out repairs to the device. For such
purposes, always use original spare parts
from Adolf Würth GmbH & Co. KG. This will
ensure the continuing safe operation of the
device.
Note on the use of lamps with
according to EN 60598-2-24
IP 4x
IP 5x
IP 6x
6
All manuals and user guides at all-guides.com

For Your Safety

Safety instructions

-mark
Environment without
dust deposition
Environment with
deposition of non-elec-
trically conducting dust
Environment with
deposition of electri-
cally conducting dust
WARNING - Prior to first use
always read the Safety instruc-
tions!
Failure to observe these operating instructions and
the safety instructions may result in damage to the
device and dangers for the operator and other
persons.
Warning
Do not look directly into the switched on lamp!
Risk of eye injuries!
Attention
The luminous elements of the lamp cannot be
changed by the user.
Use only original Würth accessories
■
and spare parts.

Information for operation

Operating modes:
• upright, to a tilt angle of 90°
• horizontal (with upward light emission)
• suspended (mounted on a hook or a tripod).
Attention!
In case of exposure to splash water
connect the device only to IPX4
sockets!
Mounting on a tripod
One or two lamps mountable with mounting
rail Item no. 0981 180 591 on tripod item no.
0981 100 1/ 0981 101 1