Doro CONGRESS 200 Manuel D'utilisation page 5

All manuals and user guides at all-guides.com
Connection of a headset
A headset can be connected to the socket underneath the telephone marked
Simply press the headset button
again to terminate the call.
While a headset is connected the speaker function will NOT operate.
IMPORTANT!
The DORO Congress 200 is designed to operate with DORO original headsets. Other
manufacturer headsets may be used, although the function and sound quality cannot be
guaranteed.
Any damage occurring due to incompatible or non Doro headsets being installed, will not be
covered under the telephones guarantee.
Making a call with the headset
1. Press . Dial tone will be heard in the headset and the LED next to the
=
headset button will illuminate.
2. Dial the telephone number required.
3. Press the headset button again to terminate the call.
Connection of additional equipment
On the side of the telephone there is a socket marked
additional telephone equipment i.e. cordless, modems etc to be connected
allowing access to the telephone line.
IMPORTANT!
When additional equipment is connected to the socket marked
will operate.
Labels/protective cover
Information such as a company logo can be placed under the protective cover.
This is especially useful where the back of the telephone is facing a customer/
visitor on a reception desk.
The back cover is fastened by 2 pieces of plastic and secured by two screws,
these have to be removed first.
To memory index cover can be removed by carefully prising the right hand side
of the cover using a small flat blade screwdriver.
www.doro.com
Installation
to access an incoming call or dial tone, press
=
8
English
.
=
, this will allow
8
, only one device at a time
5