System Settings - Doro CONGRESS 200 Manuel D'utilisation

All manuals and user guides at all-guides.com
English

System Settings

You can select several parameters when connecting the telephone to a PBX.
Recall (R) Time Duration (TBR only)
This allows you to select TBR recall access timing. The time selected will
depend on the PBX, network and country of installation. For example, UK and
Australia use 100, New Zealand uses 600.
If you are unsure as to the correct setting for your installation initially select
= 100ms
1
1. The system setting switch must be in the position ON, see page 9.
2. Lift the handset (ignore any network announcements) and press
3. Press .
0
4. Select the required setting (
5. Press and replace the handset.
z
Pause Time Duration
This allows you to select the Pause timing. The time selected will depend on
the PBX and network through which your memory number is being dialled.
If you are unsure as to the correct setting for your installation initially, select
= 2.0.
1
1. The system setting switch must be in the position ON, see page 9.
2. Lift the handset (ignore any network announcements) and press
3. Press .
2
4. Select preferred setting (
5. Press and replace the handset.
z
10
Other
=100, =300, =600 ms).
1 2 3
=2.0 and =3.6 s).
1 2
and .
z
*
and .
z
*
www.doro.com