JVC KW-AVX846 Manuel D'instructions page 62

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symptom
"Now Reading..." keeps flashing on the
screen.
While playing a track, sound is sometimes
interrupted.
No sound comes out of the speakers.
The iPod/iPhone does not turn on or does
not work.
Sound is distorted.
A lot of noise is generated.
No operations are available when playing
back a track containing Artwork.
Sound does not synchronize with the video.
No picture appears on the screen.
Remedy/Cause
Turn off the power and on again.
The tracks are not properly copied into the USB device.
Copy tracks again, and try again.
• Disconnect the iPod, then connect it again.
• Select another source and then reselect "iPod".
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod control mode is correctly
selected. (☞ page 26)
• Reset the iPod/iPhone.
Deactivate the equalizer either on this unit or the iPod/
iPhone.
Turn off (uncheck) the "VoiceOver" feature of the iPod. For
details, visit <http://www.apple.com>.
Operate the unit after the Artwork is loaded. (☞ page 27)
Select <iPod> for both <Audio Input> and <Video
Input>. (☞ page 41)
• Turn on the video component if it is not on.
• Connect the video component correctly.
62

Publicité

Table des Matières
loading

Table des Matières