Programmed Playback - Teac SR-L250i Manuel Du Propriétaire

1
Up to 60 tracks can be programmed in the desired
order.
Shuffle function does not work during programmed
playback.
< When a clock is displayed, press the DISPLAY
button once to return to the normal display.
1
Press the FUNCTION button to select "CD" or
"USB".
2 Press the MEMORY button.
track number
"MEMORY" blinks on the display.
< To cancel the programme mode, press the STOP
button (H).
22

Programmed Playback

3 4 5 2
programme number
Press the SKIP button (. or /) repeatedly
3
to select a folder on a MP3 disc or USB
memory card, then press the MEMORY button.
< MP3 tracks recorded out of folders are in the "01"
(ROOT) folder.
< Skip this step when playing a CD.
4
Press the SKIP button (.or/) repeatedly
to select a track, then press the MEMORY
button.
The track is programmed, and "P-02" is displayed.
< Repeat steps
3 and 4
< You can program up to 60 tracks.
5 When the selection of track numbers is
completed, press the PLAY/PAUSE button
(G/J) to start programmed playback.
< When the playback of all the programmed tracks
has finished, or if one of the following buttons is
pressed, the MEMORY indicator will go off and the
programme mode will be cancelled:
STOP, FUNCTION, STANDBY/ON
The programme is retained in memory until you
eject the disc or the power is interrupted. You can
return to the programmed playback by pressing the
MEMORY button and the PLAY/PAUSE button
(G/J). (If another source was selected, select the
CD or the USB mode by pressing the FUNCTION
button beforehand.)
to programme more tracks.