Teac SR-L250i Manuel Du Propriétaire page 23

To check the programmed order
In the stop mode, press the MEMORY button
repeatedly. The track number and programme
number will be shown on the display.
To clear programme
To clear the programmed contents in the stop
mode, press the MEMORY and the STOP button
(H) for more than 2 seconds.
< When you eject the disc, the programmed contents
will also be cleared.
< If the power supply is interrupted, the programmed
contents will also be cleared.
/
MEMORY/CLOCK ADJ
To add a track to the end of the
programme
In the stop mode, press the MEMORY button
repeatedly until "00" or "000" appears on the
display. Select a track number using the SKIP
button (.or/) and then press the MEMORY
button. The track is added to the end of the
programme.
To overwrite the programme
In the stop mode, press the MEMORY button
repeatedly until the programme number to be
changed appears on the display.
Select a new track number using the SKIP button
(.or/) and then press the MEMORY button.
23